* Feed unit having revolution mechanism newly developed does not need offset.
  Center of graity is at very center of recolution, i.e. only a little bit of moment of inertia results in hi-speed
  and smooth wire revolution, and also  no vibration even though ultimate hi-speed
* integrated feed unit including quill moves 60mm back-and-forth, and it is easy to make adjustment
  of coil diameter, twirl, form parts having long tail and so on.
* main tooling table is divided into 2 parts up and down, i.e. slides arranged on each table move +/-20mm
  from side to side. Adjustment for initial tension, making pitch, alignment of grooves on toolings and
  such can be made with program.
* Quil has 120mm in depth and Slide travels 140mm that give enough room for twirling of products
* Crank slide equipped on the tooling table can cut up to 2mm of wire diameter in quill cutting method.
  Durable cut slides arranged both sudes on the front plate can be applied to simple press work.
* 2 R servos, one having inner/outer double-revolution, and another having only outer and
  single-revolution are equipped as standard spec.
* Program display controlled by "MNO" is easy-to-read, i.e. program flow, each axis operation status,
  Input/Output, jump and so on can be grasped by scrolling.
* Gauging, Coil end control, Input/Output, and such program screen comes on independently

 

Motor Sensor System, MSD-1 (Standard spec.)

Positioning function is used by applying contact probe to drive servomotor.
It measures free length, outside diameter, leg portion angle in 1/1000mm resolution,
And performs corrective control. It functions as well as capacitance sensor or contact type sensor